How to Solution Automatic packing machine common fault?

Compared with the portable electric or pneumatic baling machine introduced before, the common baling machine and the vertical automatic baling machine are also introduced.

Fully automatic design, simple operation, strong durability, is also an ideal packaging equipment.For different products,

Choose different packing machines.No matter what kind of machine is used in daily work, wear and tear and failure are inevitable.

When encounter, had better go looking for professional personnel to undertake maintenance, must not maintain arbitrarily by oneself.

  

The following,

In case of failure of vertical automatic baling machine,

Maintenance and so on,

Teach you something practical

Coup?

1

, tape phenomenon, the main performance is the belt stuck in the middle of the roller, baling machine temporarily unable to operate, or there is a foreign body plug

In the inside of the machine, the foreign body cannot be taken out.

What is more serious is the phenomenon of tape jam. If you encounter this kind of problem, please contact us

Our technical staff,

To disassemble the hexagonal nut washer in the machine,

Then release the middle two pieces of the connecting shaft

The M5

Countersunk head screw,

Because the gap in the connecting shaft is held together by these two screws,

You have to turn the screw

A little bit faster

Then remove the connecting shaft, pick up the upper turbine, gently take out the card from the inside of the main machine, most

Then, follow the previous steps and gradually restore the machine to its original shape.

2

After bundling, the baling machine does not cut the belt. The reason for this may be that the packing belt is too tight. Please adjust the tightness

Degrees.

3

In addition to the above two, there is also a fault is that the baler in the process of operation can not wear belt, when the operator encountered

In this case,

Please consult our staff first.

Under the guidance of the technical staff,

First check out whether the tape length adjustment is in “0“

To see if the tape process is correct，

If the effect is still not good, then check to see if the belt roller is stuck near

Foreign body, if there is a foreign body, or to take out the foreign body in accordance with the technical specifications, do not act blindly.

4

In daily work, when there is a breakdown of the baler, the machine should be repaired according to the characteristics of the machine, it is best to ask for special

Personnel to deal with, must not arbitrarily deal with, otherwise, may cause certain damage to the machine due to improper operation, more

What is serious is the irreparable consequence.

  

In addition,

The baler must be used reasonably.

Cannot pack items outside the bearing range of the packaging machine.

In order to avoid the

The machine is bad,

Usually pay more attention to the maintenance and repair of the machine,

Doing so reduces failures,

Extending the service life of the baling machine is also acceptable

Play a role.

For more information; please contact us :  Email: info@chinapakcn.com  . whatsapp:+86-13371887128

Kindly also find our company advantages bellow :

1; Our company focused on high quality PET. PP strap for more than 20years in china

Good at high quality packing strap  And JUMNO roll strap.

2: We are the biggest PET Strap manufacturer.

3; We have Rich experiences And full Reinforced in doing business with big customers ,

Have Cooperation with Domestic big Aluminium and steel company .

Like Sapa， Gränges , china aluminium，BAO steel . -COCA-COLA .and so on .

4:  Free samples could be provided for evaluation

Mob/What app:+86-13371887128 ,Phone:+86-021-51925106

Email: info@chinapakcn.com

websit : www.chinapakcn.com

Shanghai PAKCN Packing Material CO.LTD